SCI
Publications
Our lab publishes more than three papers annually in prestigious international SCI journals. Many of these papers are featured in top-tier journals within the top 1% by Impact Factor in the engineering field.
We also participate in international and domestic academic conferences at least twice a year, where we present our research findings
SCI papers
S.W. Hyun, S. Kim, H.J. Jeong, H.S. Ko, D.H. Shin, Development of snow removal system using embedded piped inside road with solar thermal energy collector and packed bed latent heat thermal energy storage, Journal of Energy Storage. 83 (2024), 110737. IF 9.4 (15.5%)
S.W. Hyun, S.J. Han, H.J. Kang, D.H. Shin, Investigation of packed bed pouches filled with phase change material for air heating, Applied Thermal Engineering. 235 (2023), 121426. IF 6.465 (5.917%)
S. Kim, H.S. Ko, D.H. Shin, Fluid flow and heat transfer characteristics of corona wind in cross-cut finned channel, International Journal of Thermal Sciences. 184 (2023), 107962. IF 4.779 (14.964%)
S. Kim, H.S. Ko, D.H. Shin, Enhanced performance of algal decomposition of electrolysis under cavitation, Journal of Electroanalytical Chemistry. 920 (2022), 116596. IF 4.598 (23.563%)
S. Kim, H.J Oh, S.J. Han, H.S. Ko, Y. Shin, D.H. Shin, Development of black-ice removal system with latent heat thermal energy storage and solar thermal collectors, Energy. 244 (2022), Part A, 122721. IF 7.147 (4.167%)
D.H. Shin, S. Kim, S.W. Karng, Y. Shin, Development of a new type of PCM thermal capsule transport system, International Journal of Heat and Mass Transfer. 183 (2022), Part A, 122034. IF 5.584 (6.296%)
S. Kim, D.H. Shin, Y. Jung, H.S. Ko, O. Shin, Short-period thermal cyclic test device for large volumes of microencapsulated phase change materials using a Venturi injector, Journal of Energy Storage. 43 (2021), 103223. IF 6.583 (24.123%)
I.H. Jung, Y.S. Kim, D.H. Shin, J.T. Chung, Y. Shin, Influence of spear needle eccentricity on jet quality in micro Pelton turbine for power generation, Energy. 175 (2020), 58–65. IF 5.537 (4.167%)
D.H. Shin, Y. Gim, D.K. Sohn, H.S. Ko, Development of venturi-tube with spiral-shaped fin for water treatment, J. Fluids Eng. Trans. ASME. 141 (2019) 1–9. IF 1.915 (42.578%)
D.H. Shin, D.K. Jang, D.K. Sohn, H.S. Ko, Control of boundary layer by ionic wind for heat transfer, Int. J. Heat Mass Transf. 131 (2019) 189–195. IF 4.346 (5.597%)
D.H. Shin, J. Park, S.H. Choi, H.S. Ko, S.W. Karng, Y. Shin, A new type of heat storage system using the motion of phase change materials in an elliptical-shaped capsule, Energy Convers. Manag. 182 (2019) 508–519. IF 9.709 (1.1%)
J. Park, D.H. Shin, S.J. Lee, Y. Shin, S.W. Karng, Effective latent heat thermal energy storage system using thin flexible pouches, Sustain. Cities Soc. 45 (2019) 143–150. IF 4.624 (8.730%)
J. Park, D.H. Shin, Y. Shin, S.W. Karng, Analysis of heat transfer in latent heat thermal energy storage using a flexible PCM container, Heat Mass Transf. Und Stoffuebertragung. 55 (2019) 1571–1581. IF 1.551(55.833%)
D.H. Shin, S. Kim, H.S. Ko, Y. Shin, Performance enhancement of heat recovery from engine exhaust gas using corona wind, Energy Convers. Manag. 173 (2018) 210-218. IF 9.709 (1.1%)
D.H. Shin, S. Kim, S. Kim, H.S. Ko, Y. Shin, Development of a calorific value controller using bimetal fin channel for PCM heat storage, Energy Convers. Manag. 173 (2018) 508-515. IF 9.709 (1.1%)
D.H. Shin, D.K. Sohn, H.S. Ko, Analysis of thermal flow around heat sink with ionic wind for high-power LED, Appl. Therm. Eng. 143 (2018) 376-384. IF 4.026 (9.328%)
D.H. Shin, S.H. Baek, H.S. Ko, Analysis of counter flow of corona wind for heat transfer enhancement, Heat Mass Transf. Und Stoffuebertragung. 54 (2018). IF 1.551 (55.833%)
Y. Gim, D.H. Shin, D.Y. Moh, H.S. Ko, Development of limited-view and three-dimensional reconstruction method for analysis of electrohydrodynamic jetting behavior, Opt. Express. 25 (2017) 9244–9251. IF 3.561 (20.586%)
D.H. Shin, S.H. Baek, H.S. Ko, Development of heat sink with ionic wind for LED cooling, Int. J. Heat Mass Transf. 93 (2016) 516–528. IF 4.346 (5.597%)
D.H. Shin, J.S. Yoon, H.S. Ko, Experimental optimization of ion wind generator with needle to parallel plates for cooling device, Int. J. Heat Mass Transf. 84 (2015) 35–45. IF 4.346 (5.597%)
Domestic Conference Presentations
2021 Korean Society of Mechanical Engineers [Analysis of Internal Flow Characteristics of Air-Based Solar Collectors Using CFD]
2021 Korean Society of Mechanical Engineers [Optimization of Thermal Performance of Internal Heat Exchanger Coiled Pipes in Latent Heat Thermal Energy Storage Systems Using CFD]
2021 Korean Society of Mechanical Engineers [Numerical Analysis of Flow Rate Variation in Fin-Tube Heat Exchangers within Phase Change Material Storage Tanks]
2021 Korean Society of Mechanical Engineers [Optimization of Rib-Coil Shape in Solar Air Heaters Using CFD]
2021 Korean Society of Mechanical Engineers [Numerical Analysis for Thermal Performance Optimization of Coiled Pipes in Latent Heat Thermal Energy Storage Systems]
2018 Korean Society of Mechanical Engineers [Study on Performance Improvement of LHTES via Flow Control in PCM Capsules]
2018 Korean Society of Mechanical Engineers [Research on Flow Control Inside Channels Using Bimetallic Coils]
2018 Korean Society of Visualization [Thermal Flow Analysis Around Bimetallic Coils Using PIV]
2016 Korean Society of Mechanical Engineers [Study on Flow Boundary Layer Control and Performance Enhancement of Heat Exchangers Using Ion Wind]
2016 Korean Society of Visualization [Study on Turbulent Flow Control and Analysis Inside Ducts]
2015 Korean Society of Mechanical Engineers [Research on Rejuvenation Area Evaluation Method for Droplet Flow Refraction Distortion Correction]
2015 Korean Society of Mechanical Engineers [Performance Study of p-Nitrosodimethylaniline Decomposition in Electrolysis within Underwater Cavitation]
2015 Korean Society of Visualization [Study on Ion Wind Cooling Using Flow Visualization]
2015 Korean Society of Visualization [Heat Dissipation Design Using Ion Wind]
2014 Korean Society of Mechanical Engineers [Development of High-Efficiency Heat Sinks Using Counterflow Ion Wind]
2012 Korean Society of Mechanical Engineers [Optimal Design Through Structural Improvement of Offset Strip Fin Heat Exchangers]
2011 Korean Society of Mechanical Engineers [Analysis of Droplet Ejection Characteristics of Electrostatic Nozzles Based on Surface Tension]
2011 Korean Society of Mechanical Engineers [Electrohydrodynamic Inkjet Patterning Using Organic Solvents for QLED Displays]
International Conference Presentations
2020 7th V4 thermoanalytical conference
2019 2nd JATCC (Journal of thermal analysis and calorimetry conference
2018 3rd TFEC (thermal and fluids engineering conference)
2017 CCHM2T 2017
2017 The 12th International Symposium on Particle Image Velocimetery
2016 DFD16 Meeting of The American Physical Society
2016 17th International Symposium on Flow Visualization
2015 ASME-JSME-KSME Joint Fluids Engineering Conference
2015 DFD15 Meeting of The American Physical Society
2014 The Tenth Asian Computational Fluid Dynamics Conference
2014 DFD14 Meeting of The American Physical Society
2014 16th International Symposium on Flow Visualization
2013 The 9th Pacific Symposium on Flow Visualization and Image Processing